LEDwholesalers 16.4ft RGB Color Changing Kit with LED Flexible Strip, Controller with 44-button Remote and Power Supply, 2034RGB+3315+3215

$29.99 (as of December 5, 2016, 7:51 pm)

Complete kit includes: flexible LED strip, controller with wireless IR remote, and power supply
Set static colors, adjust brightness, select various auto color-changing modes via wireless IR remote
LED strip is cuttable and linkable to fit various length requirements (required components not included, combined length should not exceed 16ft)

Usually ships in 24 hours

Quantity:

Categories: , .

Product Description


Specifications (LED strip) * LED Quantity/Type: 150xSMD5050 RGB * Input Voltage (to power supply): 100-240VAC, 50/60Hz * Power: 36W * LED Strip Width: 10mm * LED Strip Length: 16.4ft (5m) * IP Rating: IP30 (dry locations only) Items Included * (1x) RGB LED strip with adhesive back * (1x) Controller and 44-button wireless IR remote * (1x) Power supply Wiring * Unroll LED strip completely. * Any exposed wires on the other end of the LED strip must not touch one another (or any metal object), creating a short. * Connect the 4-pin connector of controller to that of the LED strip, making sure that the arrows line up. * Connect 5mm DC jack of power supply to controller. * Remove the plastic seal in the battery compartment of the wireless remote. * Double check that all connections are correct and secure, then plug in power cord. Note * While the included controller can handle the power requirement of two such strips, the power supply only has the capacity to drive a single strip. * Do not lengthen the LED strip by directly connecting an additional section to it. * Extension kits are available for adding additional strips. * Test all components before permanent installation. * Make sure that wires at the other end of the LED strip are not touching one another (or any metal object), which would create a short circuit. Electrical tape may be used to wrap each of those wire ends to isolate them. * The LED strip is cuttable every 3 LEDs, approx. every 4″, at the designated cut marks.
Complete kit includes: flexible LED strip, controller with wireless IR remote, and power supply
Set static colors, adjust brightness, select various auto color-changing modes via wireless IR remote
LED strip is cuttable and linkable to fit various length requirements (required components not included, combined length should not exceed 16ft)
Flexible – fits just about any space one can imagine
Eco friendly – uses very little energy, without harmful radiations

Additional Information

Binding

Electronics

Brand

LEDwholesalers

CatalogNumberList

LESW2034RGB+3315+3215-UK, 2034RGB+3315+3215, 2034,3311+3215

Color

RGB

EAN

0633155269413

EANList

0633155269413, 0634972183678, 0885453139428, 0864562560132

ItemDimensions

70, hundredths-pounds

Label

MB9RG

Manufacturer

MB9RG

Model

2034RGB-KIT

MPN

2034RGB+3315+3215

PackageDimensions

150, hundredths-inches, 660, hundredths-inches, 125, hundredths-pounds, 600, hundredths-inches

PackageQuantity

1

PartNumber

2034RGB+3315+3215

ProductGroup

Musical Instruments

ProductTypeName

SOUND_AND_RECORDING_EQUIPMENT

Publisher

MB9RG

Studio

MB9RG

UPC

864562560132

UPCList

864562560132, 633155269413, 634972183678, 885453139428